No, you should not spray lacquer on photos. Lacquer is a type of coating that is used to protect and provide a glossy finish to surfaces. It is not suitable for photos due to the fact that it is a solvent-based product that can damage paper and other materials. In addition, lacquer fumes can be harmful if inhaled and can cause eye irritation. If you need to protect a photo, consider using a photo fixative instead, which is specifically designed for photos and will not cause any damage.
Subscribe to our newsletter
For exclusive tips, tricks and inspiration, as well as new product releases.
Sign up to receive 10% off your first order.
Terms & conditions apply. Tap here for more details.
Play video Techniques
How to: Protect Painted Outdoor Furniture with Lacquer
Video Transcript
I’m Annie Sloan, this is my studio, and I’m here to show you how to lacquer a small chair for the garden. She’s a really beautiful little one – it’s pretty old. I painted it Giverny.
I’m going to suggest you either use this brush or this. This one might be good because there’s quite a lot of texture in it. So I stir, I’m going to use a matt varnish, remember that this is the varnish that’s got UV protection in it, so this colour is going to stay its gorgeousness and it won’t fade. So a little bit into there. I could be using it directly from there but I quite like to be able to make certain that it’s all stirred and I poured that in. I don’t have to – I could do it straight from there.
So it’s just really a question of brushing. I can get in there with this brush. It’s really nice you can get into all the nooks and crannies all over. And that’s it really. It’s as simple as that There’s no secret, there’s no magic, it’s just doing this and that’s it protected.
You might want to do two coats, I wouldn’t do any more than that, two is probably because you’ll miss a bit and that’s it.
One really, really important thing to do… to know about is that I just don’t want to do just the bits I can see. Make certain that you encapsulate the whole piece. I go underneath so there are no bits that are not varnished. This is because you want to protect it all. You don’t want water getting in. If you let water get in, then it gets under and maybe then it can push out.
Probably, with a chair, best thing to do is to do it upside down first, that’s the chair not you, and then you can turn it up the right way and you’ll make certain that you’ve covered everything.
So this is a really, really bright colour. Anything bright red, bright yellow, bright blue, bright green – it will fade fairly quickly, but this has got UV protection so that’s made it fantastic. So outside, the sun won’t let it fade so it’s going to keep that beautiful gorgeousness.
So there you have it – whether you go with a matt or gloss finish, lacquering just helps extend the life of your furniture and the Chalk Paint™ finish. So have a go and let us know what you create!
Discover Annie’s top tips for a lasting finish on painted furniture for the garden.
Chalk Paint™ isn’t only for indoors. You can also update your outdoor furniture with a lick of paint – perhaps your garden chairs or even a decorative bench – for those balmy summer days enjoyed in the garden. The trick to creating a painted finish that lasts is in choosing the right varnish. Chalk Paint™ Lacquer is not only hard-wearing, but it also has built-in UV protection – so whichever paint colour you choose, you know it will stay vibrant and last longer.
Once you’ve followed this tutorial to protecting your paintwork outdoors, you’ll see just how straightforward it is to create a lasting finish. Just remember to make sure every part of your garden furniture is varnished to stop any water getting in – this will ensure complete protection from the elements and prolong the life of the paint.
Step by step guide to protecting painted garden furniture
- Paint your piece of outdoor furniture with Chalk Paint™ and allow to dry.
- Give the Chalk Paint™ Lacquer a good stir and either work straight from the tin or decant into a paint tray.
- Apply the varnish using a Flat Brush for a completely smooth finish or a Chalk Paint™ Brush if you have tricky areas to reach into. Whichever brush you choose, be sure to fully cover the chair, not just the bits you can see.
- *Top tip*: start by varnishing the your piece of furniture upside down – this will make covering every surface easier.
- Once completed, allow a few hours for the first coat of Lacquer to dry. While you wait, be sure to wash your brush out in warm, soapy water.
- Apply a second thin coat of Lacquer.
- Make sure the Lacquer has had time to fully cure (up to 2 weeks) before subjecting it to the rain and elements outside. Store painted furniture indoors or under cover during the winter to prolong its life.
Working with Chalk Paint™ Lacquer is a simple way to add a layer of protection to your outdoor furniture. Not only that, it will help keep your colours as strong and vibrant as the day you painted them. For more tips on working with this varnish, take a look at our Chalk Paint™ Lacquer Fact Sheet. Now that you’re ready to give your garden furniture a makeover, be sure to purchase all the materials you need from your local Annie Sloan Stockist.
Subscribe to our newsletter
For exclusive tips, tricks and inspiration, as well as new product releases.
Sign up to receive 10% off your first order.
Terms & conditions apply. Tap here for more details.
Play video Techniques
How to: Spray Lacquer over Paint
Video Transcript
Hello, I’m Annie Sloan. Welcome to my warehouse studio! This is a video about how to spray Chalk Paint® Lacquer. I’m here with Ron Taylor of Traditional Painter and he knows all about spraying – a complete expert. So what are all the tricks?
Ron: The Lacquer, along with Chalk Paint®, we’re going to have to thin to get it to spray well. We can see that that’s much too thick. I don’t think we’re going to need it thinned as much as Chalk Paint®, but we’re definitely going to need it thinning. So if we put some Lacquer in the pot, and we’re going to add initially about 10% water in.
Annie: Of course this is a water-based lacquer and so that’s why Ron is now adding some water to it. So before Ron started he gave this lacquer a really good stir because all the goodies are at the bottom. Last time you talked about worm threads, worm casts, which I think is a great way to describe it. So the worm casts are where you tip the stick and you let it drip and if you drip and you find you make marks in the varnish, the lacquer, then that’s too thick so you have to add water so it’s not like that, and that’s exactly the same with the Chalk Paint®. So yes, that’s looking good. Oh, a bit more water?
Ron: just a touch more.
Annie: Okay, and stir really well.
Ron: Stir really well. Do it gradually, don’t add too much water from the start because if you’ve find got too much water in, then that’s annoying. If you put too much water in something that’s like this, a gloss, it will lose its sheen.
Annie: Ah, that’s a very, very good point. So not too much water, only as much as you need. Yes, this is actually a gloss varnish, a gloss lacquer, and we want that gloss, so if you add too much water…that’s a very good point.
Ron: as with all spraying it’s best to wear a mask. You don’t want the particles into
your lungs. This is a particle mask, this is a professional mask, and while this is the best one we’ve got these sort of a DIY mask here, that’s the very bare minimum you want to be using. But for a lot of spraying this is what we want.
Annie: So everything’s ready now, so what’s the next step?
Ron: Right, first thing to do before we spray the lacquer is to get the paint setting right. So, I’m going to put my mask on.
Annie: So you’re gonna test this are you? That’s what you’re gonna be doing?
Ron: Yes, we’re going to test this first. Not on the piece, we’re going to test it on the wall just so that we’ve got it right. Don’t go straight in because if it’s wrong, you’ve only got one chance.
Annie: Good. All right, let’s go!
Ron: We’re going to set this in the widest possible fan just to test, and then we’ll alter the fan to the smallest.
Annie: and have you adjusted this bit as well to make certain that the right amount is
coming through?
Ron: Yes, that’s set to one. We’ve got these gradients round there and that’s set almost to one and that’s about right for the lacquer. It’s important to remember if the turbine is warm the lacquer will spray and flow together better. So if we set this up and leave it somewhere for about five minutes, you’ll feel the warmth in the tube and the lacquer will spray better.
Annie: So we’ve tested the lacquer. We know it’s exactly right, so now we’re going to do
it onto the cabinet. So just a few points to remember: this is something we painted
a couple of hours ago, it’s now completely dry, we’re very pleased with it. What you mustn’t do is get dirt or dust on it. If I was to touch it here or whatever – anything – when you spray it the varnish is going to bring everything up. So it’s got to be super
beautiful. Are you ready or have you got anything else?
Ron: When we spray kitchen doors, the best thing to do is to finish one side; that’s the paint and the lacquer. Because as you say if you touch this and get fingerprints on it, you’ll mark it. So if we turn that over now on a rack while it’s still in Chalk Paint® to do the other side, you’ll get marks from the rack. If we do with the lacquer, the lacquer won’t mark.
Annie: Okay, well I can’t wait to see what this looks like.
[Later] Annie: Are you pleased with the results? It looks fantastic to me.
Ron: Yes. You’ll notice when I sprayed I overlapped each pass by 50%, so I sprayed a line and then I sprayed the next line so it overlapped the previous line 50%. If you just spray strips like a crossing you’ll end up with dry patches.
Annie: Yes, you don’t want stripes.
Ron: you’ll also notice I didn’t alter the setting for the lacquer to thin for the edge, because the lacquer can pull if it’s on too thick so it needs to be a consistent finish. So I always keep that setting to the widest even for the edge.
Annie: so we’re going to let this dry and how long will that be?
Ron: I would think if we leave that for half an hour we can put final coat of lacquer on.
Annie: fantastic. So that’s it! Spraying with Chalk Paint® Lacquer; it’s really, really easy.
Can You Lacquer Over Paper?
It will be difficult to preserve the paper. Lacquer will render it an unnatural color and shine. You could try poster glue (paint over the paper) or wallpaper glue, but they’re a little late.
Can You Use Acrylic Sealer On Paper?
Allow the paper to dry completely before spraying both sides with clear acrylic sealer (which takes several coats). After painting with Mod Podge on both sides, let it dry. After that, you can begin crafting as usual.
Protect Your Paper Projects: Exploring Sealers For Preservation
In terms of protecting paper products, there are several sealers available. Krylon and Mod Podge Spray are two of the most popular glues. Krylon’s archival sealers are ideal for protecting paper from dirt, dust, and moisture, while Mod Podge Spray’s finish gives the paper a more decorative appearance and can be used to preserve photos or other special items. If you prefer a more traditional approach, you can brush on a sealer like varnish or shellac to remove any fingerprints or smudges. Furthermore, glaze can be applied over these mediums to provide extra protection and can be applied once the mediums have been sealed. If you want to achieve the same results as your paper project, you can rely on a variety of sealers.
Can I Spray Lacquer On Paper?
Spraying lacquer on paper can be done, however, it is not recommended as lacquer is a sealant and can damage the paper by making it brittle, discolored and potentially even stick together. It is best to use a sealant or coating that is specifically designed for use on paper, such as a water-based sealant or varnish. This will create a protective layer that preserves the paper’s color and texture while still allowing it to remain flexible.
Painting with Lacquer (Illustrating Guide) is an illustrated guide that describes all of the steps involved in painting with lacquer. When you learn the proper way to spray lacquer, you will gain a whole new perspective on life. Simply use high-quality lacquer with its matching lacquer thinner, and you’re good to go. The finishes I prefer for my turned wood bowls are oil-based satin luster, finished with Tried and True, and a high gloss lacquer finish. It is not as common to find higher-quality canned spray lacquer as it is to find cabinet-grade lacquer. We will use a higher-quality lacquer and install a spray system to achieve better results. Water from the air compressor line collects in an inline moisture collector, which is used to remove the water.
The metaphor of laminar flow is an intriguing scientific concept. A nice flow of air from the hose should enter the gun smoothly and consistently. As a result, the lacquer’s spray from the nozzle may be affected. The spray gun has three control knobs that allow it to move fluid, flow, and change patterns. As a result, when using the needle removal and adjust knob, we can remove the fluid needle by sliding it out the back of the spray gun. The front of the nozzle is removable, with two prongs protruding outward that allow the spray pattern to be controlled. If the air regulator is set to 20 or 25 PSI, the gun may only have 12 or 15 PSI of air pressure when spraying.
The lacquer will fly off the gun as a result of this. Use a variety of settings to determine which works best for your setup. If the spray gun’s flow is weak, make sure the air control knob is completely open while spraying, and then check to see if the air regulator is reading 20-25 pspi when the gun is running idle, not when it is partially open. Lacquer can be purchased in many places, but there’s a secret hidden somewhere. In California, you can only purchase what is permitted in the store. Lacquer and lacquer thinner are sold at cabinet maker supply stores. Lacquer products have been modified or removed from California to meet state regulations.
To work, you must use both brands A and B lacquer. Gemini and Mohawk are among the most well-known brands. Sanding sealer is lacquer containing glass particles. This glass layer is made up of microscopic glass particles that act as optical coatings, forming a protective layer between the lacquer’s surface and the wood. Lacquer that is reactive to elements degrades over time. A satin or matte lacquer is a gloss lacquer that has other components added in. To do so, you must wear safety glasses as well as a mask.
It is pointless to use a paper dust mask when spraying chemicals. If you can smell it, you’re in the air. I use painters masking tape on my four jaw Chuck to prevent overspray from coating the metal. Lacquering a wood bowl is the best way to achieve a stunning shiny gloss finish. Before applying lacquer, you should finish sanding your wood bowl to about 220 or 320 grit. If the wood bowl’s end grain is very porous, you should use a high-quality shellac first to protect it. Lacquer is essentially a film finish on wood, which means that it does not soak into the wood as a surface.
In the case of a new layer, it is partially dissolved and integrates with the existing layers. Because the lacquer bonds to itself, it is easily bonded to surfaces. Lacquer should not be applied over wax or silicone. Because silicone has a nearly impossible time of removal from a surface, it is nearly impossible to remove it. If you want to go down the entire length of the wood surface, you might need to go all the way down. As a result, any lacquer that may have hardened in these orifices is removed.
Can You Spray Lacquer Over Paper?
Paper with clear polyurethane coating, clear acrylic spray paint, lacquer spray sealers, and all waterproof finishes are available. Matte, satin, glossy, and high-gloss finishes are just a few of the sprays on offer.
What Can I Spray On Paper To Preserve It?
This spray protectant can be used to protect digital photos and documents, and it can double the life of digital prints. In addition to preventing UV fading, moisture, and dust from damaging paper items, it also prevents moisture and dust from damaging them. Because of its moisture-resistant properties, acid-free composition, and archival protection, it is a moisture-resistant spray.
Can Rust Oleum Be Used On Paper?
Rust-Oleum® Matte Finish is a clear protective spray designed to remove glossiness and glare from surfaces. Decorative projects can be painted with this finish without the need for yellowing. These mats can be used on wood, metal, wicker, plastic, glass, plaster, ceramic, and paper. Interior surfaces should only be used as a starting point.
Spray Lacquers
Spray lacquers are a type of paint that are used to protect and finish wooden surfaces. They come in a variety of colors and finishes, and can be used on furniture, cabinets, paneling, and other wood surfaces. Spray lacquers are easy to apply and dry quickly, but they are also durable and can provide a long-lasting finish. They are usually more expensive than other types of paint, but they are worth the investment for the professional look and protection they provide.
Lacquer is a thinner and more flexible finish than paint, making it ideal for wood surfaces that have had their integrity and durability compromised. Lacquer is more resistant to changing conditions than paint, which is susceptible to soften due to moisture absorption. Lacquer is applied using a sprayer rather than a brush or roller, which makes it more effective. Lacquer should not be applied over a number of coats that can crack and tarnish, and it should not be applied to the entire surface. It is recommended that three to five wet coats be applied in between each dry coat in order to get adequate flash-off times. Lacquer has the potential to provide a long-lasting, smooth finish thanks to its smooth and resilient properties.
Achieving A Professional Finish With Spray Lacquer And Clear Enamel
Furniture, metal, plaster, and other materials can be painted with spray lacquer in addition to finishing with a factory-like finish. The substance is thinner than paint and is frequently applied using a sprayer rather than paint. The wood dries quickly to the touch, usually in less than 20 minutes, and it can be used to preserve the natural appearance of the wood. Although spray lacquer can be used with a brush, you should use it with care. You will get a much more professional finish because the lacquer is better suited for wood surfaces that are becoming more resistant to damage.
topcoat that is frequently used in place of spray lacquer. Lacquer is more durable, but it can be used on both wood and metal. Although lacquer can be mixed with it, it cannot be mixed with paint. One could be the better option depending on the project and the desired look.