Рубрики

paintingpainting coral

Beginner-friendly coral reef acrylic painting

But not just any old paint…


Beginner-friendly coral reef acrylic painting

Contemporary painting with flowing long abstract brushstrokes and heavy texture in shades of blue, teal, aqua, and silver colors.
I created an abstract seascape painting that representing shapes the patterns of sea waves with ocean colors.

The vibrancy of colors of Gulf Coast nature forms an endless source of inspiration for my work. Inspired by the ocean’s teals, gray, and blues, I created this abstract ocean’s cape, an interpretation of splashing waves.

I was inspired to create the painting by Beaches of Fort Myers and Sanibel Island, located on the beautiful Gulf Coast of Florida.

Original and modern feel and a really nice texture.

This is an original abstract 3D vertical or horizontal contemporary painting presented on a gallery wrapped canvas.
Painting is stretched on a supported 1.5 inch thick wooden frame.
Only high quality artist grade acrylic paint and mediums are used.
The painting is hand signed and dated on the back.
The edges of the canvas are painted and it is ready to hang.
Each of my pieces has a clear gloss UV protective finish coat.
Certificate of Authenticity included.

Large Abstract Landscape Textured Painting. Modern Art in Neutral Colors for Living Room or Bedroom.
Abstract Landscape, Minimalistic Art, Fine Art, Abstract Art, Wall Art Canvas, Modern Wall Art, Modern Abstract, Contemporary Art, Large Canvas Art, Livingroom Decor, Original Painting, Modern Home Decor, Abstract Painting, Living room Painting, Bedroom painting, Abstract Wall Art, Heavy Texture, Large Abstract Art, Modern Abstract Art, Abstract Canvas Art, Contemporary, Modern Wall Art Canvas, Large Abstract Canvas, Large Contemporary Art, Large Abstract Artwork, Large Abstract Painting, Large Wall Art Abstract, Large Original Painting, Original Modern Abstract,
Thick Oil Layers, Palette Knife Art, Colorful Abstract, Heavy Textured, Art For Living Room, Texture, Coastal Decor, Tropical, Beach House Decor. Beige, Neutral, White, Brown, Soft, Natural Colors, 3D painting, Brush strokes, palette knife, office painting, good Vibes, natural palette, calming, minimalism, modern interior design, interior painting large

Materials used:

Acrylic paint, Gallery wrapped 1.5″ (4cm.) deep canvas





The danger of using the wrong paint on your aquarium

Krylon Fusion aquarium spray paint

Krylon K02758007 Fusion All-In-One Spray Paint

  • Offers rust protection
  • Bonds to difficult surfaces even without priming
  • Matte finish

Plasti dip spray paint for aquarium

Performix 11203 Plasti Dip Black Multi-Purpose Rubber Coating Aerosol

  • Dries into a firm rubber
  • Can also be used to seal decorations
  • Fish-safe

Drylok aquarium safe masonry waterproofer

Drylok 27512 Latex Water Proofer

  • Commonly used for 3D aquarium backgrounds
  • Plain white color
  • Waterproofer that can act as paint

Your aquarium might look calm and soothing, but it’s actually an extremely harsh environment. Well, for paint, anyway.

Most paint does not do well when exposed to water. The bad news? Your tank is full of it.

Many paints absorb water and soon begin to bubble or peel, breaking off in tiny flakes. To your dumb fish, those flakes of paint look near identical to fish flakes – nom, nom, nom!

I don’t have to tell you that paint isn’t something that should be included in your fish’s diet.

Even paint that appears to hold up just fine can be leaching deadly chemicals into your tank – chemicals that you cannot see!

Not even the best aquarium test kit can detect these harsh chemicals. You won’t know there is a problem until it’s too late and all your fish are dead.

Toxic paint used on aquarium killing fish

To put it simply:

You are trusting the lives of your fish with this paint. So, make sure you choose the right one!

Which brings me to my next point…

There isn’t really such a thing as aquarium-safe paint. At least not officially.

At the time of writing this, almost none of the big paint manufacturers have tested how their product works in aquariums. And between you and me, I don’t think they ever will. Not enough demand exists for an aquarium-safe paint to justify this expensive research.

As a result, no company is going to declare that their paint is safe for aquariums.

But that doesn’t mean the paint is unsafe…

It just means that these companies don’t want to make these claims and leave themselves open to lawsuits.

Don’t get me wrong, industrial-purpose, non-toxic epoxy paints designed for aquaculture or beer brewing are out there. But these cost hundreds of dollars and likely more than your entire aquarium setup. [1]

Fortunately, the need to paint something inside an aquarium is a fairly common problem. For those of us who can’t afford these premium-priced paints, there are budget options available.

And after years of testing through trial and error, hobbyists now have a good understanding of which paints are considered safe for your aquarium and which should be avoided – and they are affordable.

Let’s take a closer look at the different paint you can use with your aquarium…

Best aquarium-safe paint for inside your aquarium

This section covers paints that will be submerged in your tank, such as on decorations and pipes. These paints won’t peel, flake or leach chemicals when placed under water, keeping your fish safe.

Unless otherwise stated, all paints need to be applied outside of the aquarium and left to dry before being placed inside your aquarium.

The following recommendations are suitable for both freshwater and saltwater aquariums.

1. Best aquarium-safe spray paint

I love spray paint. No brushes, nothing to clean up, just spray and you’re done.

It’s pretty much my go-to weapon when using those horrible white PVC pipes in my aquariums. A quick coat of black paint and they basically disappear into the background.

The trick to applying spray paint is thin, even coats so that it doesn’t drip. You can always add more layers once the previous one dries.

Krylon Fusion is the most commonly recommended aquarium spray paint and is particularly popular for those with reef tanks.

It clings to plastic, PVC and resin and has a clean finish. But the main reason for its popularity is the wide range of colors that it is available in – no other paint used by hobbyists comes in such a selection.

I attest to its effectiveness. I used Krylon Fusion on a tank I owned waaaay back in 2006. I took the tank down four years later, and my PVC pipes showed no signs of flaking.

While Krylon Fusion may dry in as little as 15 minutes, it takes an entire week for it to properly cure and become chip-resistant. Once the week is finished, rinse it in dechlorinated water to remove any leftover residue and dust that accumulated on the surface.

Ignore the fact that Krylon Fusion claims to need no prep-work. If you skip the prep, you are much more likely to experience chipping or flaking. Sand and clean any surface before coating it with Krylon Fusion.

FishLab Tip: Krylon makes a variety of different spray paints. Only Krylon Fusion is considered aquarium-safe once cured.

Krylon Fusion is only to be used for painting plastics. If you want a spray paint that is suitable for other materials, including glass, then check out my next recommendation:

While it may look and apply like regular spray paint, this unique product dries into a firm rubber.

It’s this unique property that means Plasti Dip won’t flake or crack, even after years of being submerged in your aquarium. You can even use it to seal decorations that would otherwise be unsafe in your aquarium.

It truly is fish-safe. Let’s say you have a pleco that enjoys rasping algae off any surface in your aquarium. You can remain confident that he won’t remove any rubber while gnawing on the algae coating it – same goes for any other algae eaters like snails, shrimp and crabs.

Once you finish the final coat, wait 24 hours to ensure that the coating has cured properly. If it’s going in your aquarium, rinse it in a bucket with dechlorinated water first.

2. Best aquarium-safe paint for everything else

Spray paint is pretty much my go-to for anything I need to paint inside my aquarium. But what happens if you need to paint something unusual, say Styrofoam, concrete, brick or even a terracotta pot?

Well, that’s where my next recommendation comes in.

Drylok is typically used in larger applications, like ponds. But because it is fish-safe, you can also use Drylok inside your aquarium.

In fact, Drylok is commonly used in 3D aquarium backgrounds – you know, the ones that look like real rockwork. [2]

Now, it’s worth mentioning that Drylok isn’t really paint. It’s a water proofer. It seals whatever you coat it in, protecting it from water.

Because of this, Drylok is plain white in color. While Drylok comes in various colors, they likely are not aquarium-safe.

However, you can create your own colored waterproof paint by mixing Drylok with Quikrete Liquid Concrete paint, which is also aquarium-safe.

Quickrete Liquid Concrete Paint is available in:

  • Charcoal
  • Brown
  • Buff (Dark Orange/Brown)
  • Terracotta
  • Red

The more Quikrete paint you add to Drylok, the more vibrant the color. By using more or less, you create different shades of color. With careful application, use these shades to create shadows and highlights.

Important: Buy the Latex-Base Drylok Masonry Waterproofer, which is linked to in this guide. Drylock makes other waterproofers, such as Drylok Pro and Drylok Extreme, that contain fungicides. These can kill not only the beneficial bacteria in your aquarium but also your fish.

Now that I have covered paint that is suitable for inside your aquarium, let’s take a closer look at what you can use on the outside.

Aquarium-safe paint for outside your aquarium

Painting the background of a glass aquarium in blue paint

This section covers paint that is not going to be submerged under water, such as the glass, trim or even the stand that your aquarium rests on.

But by far the most commonly painted part of an aquarium is the rear glass panel.

FishLab Tip: Want to paint a background on the rear of your aquarium? Make sure you do it before you set up your aquarium and add your fish.

Is your aquarium is already set up? Use a vinyl background like this one instead – it can be easily applied with fish inside your tank.

Painting the rear and sides of your aquarium makes your fish and plants much easier to see. It blocks any distractions that might be present on the other side of your tank.

Black and blue are the most commonly used colors for painting aquarium backgrounds.

I personally paint my aquarium background black – it’s the same color as my heaters, filter plumbing and overflow, allowing them to blend into the background. Blue, on the other hand, is much more commonly used in reef tanks.

But which paint should you use?

Truth be told, it doesn’t really matter what paint you use on the outside of your tank – this isn’t going to come into contact with your fish.

I have seen hobbyists use spray paint, rolled-on acrylic paint, Plasti Dip…

While most hobbyists use flat (matte) paint for their background, it doesn’t matter too much if you use gloss or semi-gloss. The glass is going to add glare when you look at the background from the inside of your tank anyway.

If it’s going on the back glass on the outside of your aquarium, it doesn’t matter too much which aquarium paint you use. They all leave a smooth finish that makes the inside of your aquarium pop.

You need to consider your future plans for your aquarium.

Over time, the paint can scratch, and you might accidentally drag your aquarium net or foil fish food packet along the rear and leave a nasty gash.

Even if you are careful not to scratch it, the paint might just not hold up well to the wet environment that is your aquarium.

To get rid of scratches, you basically have to strip off the paint and start again.

If your paint is designed to go on and stay on, then removing it can be a chore – typically involving hours slowly peeling away the paint with the help of a razor blade.

That’s why I use Plasti Dip. It is easy to spray on the rear of your aquarium, dries smooth and looks great. My Plasti Dip background has been going strong for two years now and shows no sign of becoming brittle or cracking.

But that’s not the best part. When the time comes to remove your background, simply peel it off. Yep, because Plasti Dip is rubber and not paint, it is really easy to remove.

It’s easy to see why Plasti Dip is the go-to background paint of many fish keepers.

As for stands, cabinets and anything your aquarium rests on, use an oil-based paint. Oil-based paints are water-repellent and hold up well to being splashed with water during a water change.

Colin Wynn
the authorColin Wynn

Leave a Reply