The fluorescent paints are a collection of bright neon colours for surfaces that want to be highly visable. The effect is similar to the colours of the highlighters markers.
Fluorescent paint for wood
Fluorescent paint composition: Ultraviolet paint for wood from Noxton is made with high quality water-acrylic dispersion that has high adhesion and is prepared for mixing with a fluorescent component.
Purpose of the UV paint: Wooden surfaces inside and outside the house. Wood doors, chairs, wardrobes, wooden flooring, laminate, wood indoors and outdoors items, fiberboard, particleboard, MDF, boards, plywood, veneer, furniture panels, OSB and a lot more.
Properties of the paint: Ultraviolet paint glows brightly with its color when exposed to ultraviolet rays. You can use different ultraviolet waves spectrums to start the glow. During the day, covered with ultraviolet paint surface will have an attractive and rich color.
Methods for applying: Using a brush, roller, pad or through the spraying method.
Use of the fluorescent paint: The surface should be clean and dry. You have to mechanically remove the dirt; grease and dust has to be washed off from the surface. Before using the fluorescent paint from Noxton you have to mix it thoroughly until smooth (compulsory condition). It is recommended to apply 2-3 layers of the paint. Drying time for each layer is 1-2 hours at a temperature of +20�C.
Consumption of the UV paint: up to 14 m 2 /l. in 1 layer (depends on the painting method)
Recommendations: Regulate the application uniformity using an ultraviolet lamp when applying the fluorescent paint.
Health: Nonradioactive, nontoxic, harmless to humans.
Storage: Keep in a tightly sealed container at a temperature from +5�C to +40�C. Storage life of the fluorescent paint is up to 3 years, thanks to “KeepSafe” technology*.
Package sizes: 0.5 liters, 1 liter, 3liters, 5 liters, 10 liters.
White fluorescent paint – white during the day, bluish-white glow when exposed to ultraviolet
Yellow fluorescent paint – yellow during the day, yellow glow when exposed to ultraviolet
Red fluorescent paint – red during the day, red glow when exposed to ultraviolet
Orange fluorescent paint – orange during the day, orange glow when exposed to ultraviolet
Blue fluorescent paint – blue during the day, blue glow when exposed to ultraviolet
Green fluorescent paint – green during the day, green glow when exposed to ultraviolet
Pink fluorescent paint – pink during the day, pink glow when exposed to ultraviolet
Dark pink fluorescent paint – dark pink during the day, dark pink glow when exposed to ultraviolet
- This paint is made with high quality fluorescent pigment that is extremely sunproof (it is very important!)
- It has high light-fastness rate and super long life time
- Ultraviolet paint has a very attractive “price/quality” ratio that is highly appreciated by our customers
- When applied to surface, fluorescent paint forms a durable glow in ultraviolet film that will be providing a homogenous glow when exposed to ultraviolet
- Consumption of our paint is extremely low – one liter of the paint would be enough to paint a large area.
- The excellent coverage rate of our UV paint – even one layer will be enough to create a high quality glow in ultraviolet coating
- Service life of our fluorescent paint is 200 years! This became possible thanks to “KeepSafe” technology! You’ve never seen anything like that before
- Noxton Company has a permanent special offer going called “It can’t be cheaper” ! Learn more about it by following the link
- Ultraviolet paint is made of eco-friendly materials so it won’t affect your health (unlike many others)
- Fluorescent paint is the same product as: ultraviolet paint, fluorescent liquid, transparent paint, glow in ultraviolet paint.
To see the prices for all kinds of fluorescent paints from Noxton please proceed to “Price list” page.
* It is known that the service life of the liquid medium is limited in time so Noxton Company came up with a new simple and effective technology called “KeepSafe” that allows you to separate the glow in ultraviolet material from the medium and use it again wherever you want for years. This is the best option you can choose today and it is highly appreciated by our customers.
Acmelight Wood – glowing paint for wood, plywood, fiberboard and particleboard
Acmelight paint for wood, plywood, fiberboard and particleboard. Wooden surfaces are undergone to special risk. It is an influence of UV rays. The definite rate of protection to such surfaces can be provided by different solvents. But neither of it can simultaneously carry out the decoration function. No one, except glow in the dark paint Acmelight Tree, which will not only protect the wood from UV rays, but also will remake even the very ordinary wooden item till the incognizance, when only the sun will go down the horizon, and in the darkness.
Acmelight Tree is an ideal protection for wooden surfaces, which can stand the test on form of precipitations and mechanical damages. Product is resistance to oils, solvents, detergents. Beautiful, special and practical for a long time – exactly so it is possible to characterize paint Acmelight Tree in a few words.
Application:
It is designed for decoration of wooden surfaces inside and outside premises. It can be used in design and decor, as well as for decorative finishing and protection of gates, fences, poles, boats, fishing boats, yachts, marinas open ponds, wooden houses, sheds, garden buildings, gazebos, porches, terraces, window frames, doors, floors, walls, flower boxes and pots, as well as balconies, kitchens, bathrooms and swimming pools.
Application method:
Paint is covered by brush, roller or dipping in 1-3 thin layers. Paint can be dissolved on 20%. The drying period under the temperature +20 °С and the relative humidity 50%: up to 4 hours. Sanding and applying of the next layer can be made in a day. Consumption: 1 layers 10-12 sq.m.1 l.
Consumption:
1 layers 10-12 sq.m.1 l.
Attention!
The paint contains additives, which settle to the bottom of the can. Before application the paints should be thoroughly mixed for 2-5 min till the homogeneous mass. During application it is necessary to mix it often.
Storage and precautions:
Store and transport the paint in hermetically closed containers, under the temperature from 0 up to 30°С out of childrens reach. Keep away from ignition sources and from direct sunlight, heating devices and moisture. During the painting, the building should be well ventilated. Use rubber gloves for protection of your hands. Use a respirator for respiratory protection, applying spray method. The empty containers should be recycled. The working tools should be washed in solvent.
Glowing period:
6-8 hours after charging
Fast drying:
Under the temperature +20°С and the relative humidity 50% – up to 4 hours.
The surface preparation:
The surface should be cleaned of old loose and opaque coverings, dust and dirt should be removed.
Packing:
metal can 0,5 l., 1 l.
Composition:
On a basis of high-quality 2k acrylic resin with functional additives, xylene, mixture of sterically composed salts.
Shelf-life:
18 months from the production date.
Fluorescent paint applied to different surfaces
Maximum brightness fluorescent paint
Fluorescent paint applied to different surfaces
Fluorescent paint applied to different surfaces
Maximum brightness fluorescent paint
Typical characteristic of fluorescent colors is the high duration of the effect when used indoors (fluorescent colors are not suitable for use outdoors).
Normally the fluorescent paint is proposed in an opaque finish because this is the version required by the market and the one that produces the best results of coverage and homogeneity on large surfaces.
A version (layed over with transparents) to make the fluorescent effect glossy or soft to the touch is also available. This version has direct cohesion on many supports such as polyurethane bases, epoxy primers, and common plastics such as ABS and ABS-PC.
The Fluorescent paint effects results in a surface with high strength and is repeatable for commercial or industrial applications. These include:
- Household Products and Decorative Items
- Furniture – Custom and Commercial Production
- Helmets for Sports
- Bicycle Parts and Accessories
- Sport Equipment
- Informational Signs for Warehouse and Business
- Handles for Furniture, Products and more
- Decorative Accessories
- Commercial Products
- Electronic Items
- Lighting Fixtures and Accessories
- Display Stands
- Exhibition Stands
A sample kit of this paint is available for purchase. The sample kit will have 1 kg of each paint needed to make the effect. We supply primer, special effect paints, topcoat (if needed) and hardener and thinner for spraying. This can paint a 3-5 m2 area.
This paint effect can be sprayed on:
- Wood, MDF, HDF
- Metal (iron, aluminium, brass, etc.)
- Plastic (ABS, ABS-PC, etc.)
- Glass
There is often confusion between the Fluorescent and the Phosphorescent paint effects. We want to explain in simple terms what are these two types of colors:
FLUORESCENT paints: paints with bright neon colors like a typical office highlighters
Fluorescence colours are in the visible spectrum, so they can be seen by the human eye. They absorb radiation from the ultraviolet spectrum – not visible to the human eye – and release it in the visible spectrum as bright colours.
PHOSPHORESCENT paints: also called glow-in-the-dark or photoluminescent paints. These are paints that absorb light and reflect it as a glow when the lights go out.
Difference between fluorescence and phosphorescence
Without going into detail, we can say that fluorescence and phosphorescence are very similar phenomena that manifest themselves for different times of release the light after a luminous exicitation.
The distinction between the two processes depends on the release time: in fluorescence the luminescence ends almost immediately after removing the light source, while in phosphorescence the light continues to be emitted, at least for a short period, even after removing the exciting source.
Both phenomena start from a molecular excitation with luminous radiation, more effective in the ultraviolet.
For more information about the difference between fluorescence and phosphorescence we recommend visiting the following links:
Molecole – yahooAnswer
What is the difference between Fluorescence and phosphorescence
