The satin finish doesn’t have any types. Different brands provide different satin colors based on their user’s requirements. It is a miniature version of glossy paint because the satin finish won’t gloss as much as like glossy finish. And it is the opposite of a matte finish.
Satin vs Regular Acrylic Paint – Which Is the Best?
Finding difference between satin vs regular acrylic paint is hard, isn’t it? Painting means not only coloring on walls, floors, or canvas. It is related to the craftwork. So, while painting, you must need some basic knowledge about each paint type.
Acrylic paint is today’s own of most popular paint, which is available in different types. People also use regular flat paints. Different paints have different tones, and it is not necessary for everyone loves every tone of color.
But both satin and regular acrylic paint are great options for craftwork because designers admire them. So, we will present everything about satin acrylic paint vs regular acrylic paint to upgrade your design ideas.
Table of Contents
Satin paint is a versatile color that you can use everywhere, from doors to cloths. Especially on ceramics, it provides a great shiny look. Some colors provide a more shiny effect that looks odd in some cases. In that case, satin paint provides a mature look with a medium shiny finish. The glossy finish looks great but also looks odd in some cases.
Compared to matte paint, satin is glossy. It is durable and easy to clean. This color is best for home areas. You will find satin colors from different paint types and brands.
Considering professionalism, satin acrylic paint is a good choice. After finishing the painting, you can apply satin finish additionally over the texture. Those who love glare in their home decoration, they use satin paint.
Regular Satin Paint Vs Regular Acrylic Paint
Consistently brands and quality is highlighted point when comparing two things. We don’t talk about products in this article. So, this comparison will give you proper knowledge between regular paint vs acrylic paints. If you want perfection in the painting and design, you need to know all the inner information.
Both paints have different characteristics. That’s why both paints have different uses. Before making an in-detail comparison, please take a look at their short description. Then you can easily understand the key differences.
Regular satin paint is a water-based color made from acrylic resin. It comes in a big container and uses in large areas to paint. These dyes dry slower. It could be a benefit or disadvantage based on your use.
On the other hand, regular acrylic paint is also water-based but entirely made with the chemical. It usually comes in small quantities because it won’t apply to big areas like standard latex paint.
Most professionals use this color to create pro-level craftwork. It dries very fast. This is best to paint on canvas. You can check out acrylic paint vs satin acrylic paint to know more about satin acrylic paints.
Description
Acrylic Satin is an incredibly tough interior and exterior paint for walls and woodwork, with a lustrous, velvety finish. Surfaces are easily washed and have high scrub and mould growth resistance making it ideal for use in wet areas, high-use areas and where maintaining hygiene is important. What’s more, no undercoat is required when using Acrylic Satin on previously painted surfaces and it can be used as a mist coat for sealing new plaster, plasterboard and jointing compound prior to applying top coats. This means one product is all you need and therefore saves labour and product costs.
Typical Uses
- Interior gypsum plaster, plasterboard and timber surfaces
- High use interior surfaces and where regular cleaning and washing down is necessary for hygiene
- Exterior timber windows and doors
- Exterior timber claddings / panelling
- Metal radiators and surfaces (with appropriate metal primer on bare substrates)
Physical Properties
- Sheen level* – 20%
- Coverage – Up to 20 square metres per litre per coat (varies with substrate and texture)
- Recommended dry film thickness – 30 microns per coat
- Recommended number of coats – Two
- Touch dry and recoat time – Between 20 minutes and 1 hour (dependant on atmospheric conditions)
- Scrub resistance – Class 1
- Volume solids – 42%
- Colour availability – Any colour
- Pack sizes – 2.5, 5 and 10 litres
- Odour – Virtually nil
*Final sheen level is given based upon two full coats being applied
Environment
- 2010 maximum permitted limit grams per litre – 30g/l
- VOC category for this product – a
- Actual VOC content grams per litre – 25 g/l
- Classification – Minimal
Anti-Microbial Option
Acrylic Satin is also available in Microsafe, our highly effective anti-microbial formula shown to reduce MRSA by at least 99.91% and E coli by 99.4%. It is perfect for high traffic areas where hygiene is critical.
Health & Safety
Our products are designed to cause no harm. Detailed safety information is available on request.
Ensure that surfaces are free from dirt, dust, grease, mould and any other contaminants that may affect adhesion. Clean off any surface mould with fungicidal cleaner and rinse off. Contaminated areas should be washed down thoroughly with sugar soap and rinsed off. Once cleaned, lightly sand surface to form a key and then clean with a lint free cloth. Imperfections and loose flaking paint should be sanded to remove as required, and all dry painted edges feathered off to a smooth finish.
Holes, impressions and cracks must be filled with an appropriate surface filler. Powdered fillers are not recommended. For best results use Easifill, Red Devil, Onetime or two pack fillers for wood. Spot prime all surface fillers with a suitable primer for the substrate before the application of top coats.
New timber surfaces
For soft wood, knots should be treated with a proprietary knotting solution to prevent bleed through. Ensure that the wood is completely dry. A suitable, quality primer is necessary for exterior timber surfaces prior to applying the top coat. For interior timber Hanford + Green Acrylic Matt or Acrylic Durable Matt can be applied as a primer.
Timber surfaces previously painted with acrylic paint and alkyd paint
No undercoat is required when correct preparation has been completed. Clean and sand lightly to provide a key to aid adhesion.
Plastics
Clean and lightly sand to provide a key followed by an application of a suitable, quality primer before applying top coats.
Bare ferrous and non-ferrous metal surfaces
Clean to remove any grease or contaminants. Apply a proprietary metal primer before applying top coats.
Previously painted ferrous and non-ferrous metal surfaces
Clean to remove grease and contaminants. Spot prime with proprietary metal primer any bare metal before applying top coats.
Previously painted gypsum, fibrous plaster and paper faced plasterboard and jointing
Clean to remove any surface contaminants and sand to feather any raw edges of existing paint / coating. Fine fill using a proprietary filler as required and spot prime fillers with Hanford + Green Acrylic Matt or Durable Matt.
New gypsum, fibrous plaster and paper faced plasterboard and jointing
Ensure that plaster and jointing fillers are dry, sanded as necessary and free from dust before beginning the application of any paint. Apply one mist coat of Hanford + Green Acrylic Matt as a sealer, thinned in accordance with thinning guidelines, before applying top coats.
Application
This product can be applied in temperatures between 5°C and 30°C. Take care to avoid contact with the painted surface before the product has been able to dry. Always follow the touch dry and recoat times stated above.
Brushing
Use only high quality synthetic brushes suitably sized for the job in hand. Ensure that brushes are sufficiently dry after washing out before use.
Apply paint generously with even brush strokes maintaining a wet edge as you progress leaving the paint to find its own level. Do not overwork and take care not to brush over paint that has already started to dry. In high temperatures, paint pail open times can be extended by dilution with water at the ratio of no more than 1% by volume.
Roller
Use only short napped synthetic rollers for the best result on smooth surfaces. The nap length can be increased for textured surfaces as required. Take care to maintain a wet edge and to avoid lapping marks and flashing. Never over roller paint that has started to dry.
Spray application
For airless spray application, dilute paint by 25%. Use tip sizes and pressure based upon the job in hand. In all instances, seek technical guidance from the manufacturers of the spray equipment.
